JUKI DX-2000QVP Instruction Manual page 48

When changing the needle entry point
1. If the stitches reach too far beyond the folded edge
2. If the stitches fail to reach the folded edge
46
Turn the zigzag width
adjusting dial to the
right side.
Turn the zigzag width
adjusting dial to the
left side.
Turn the handwheel
to check the needle
entry point. When
adjusting, make sure
the needle is in the
up position.
Turn the handwheel
to check the needle
entry point. When
adjusting, make sure
the needle is in the
up position.