Piping Cord - JUKI DX-2000QVP Instruction Manual

Piping Cord

2.5 - 3.0 cm
Pattern No. Direct 1
Pearl attaching
Presser foot
presser foot
1
2
3
Turn OFF the power switch
before replacing the press-
er foot.
When making a piping cord, cut the fabric
with 2.5 - 3.0 cm width.
* Adjust the width according to the thickness of
the cord.
Fold the cut fabric in half and wrap the
cord. Sew the edge of the cord.
Change the needle position to [7.0].
Tip: Push the cord to right side of the groove to
sew straight.
Attach the piping core to a project. At this
time, change needle position to [6.6] and
sew as per 2 above,then stitches will not
be on the right side of the fabric.
Attention
73