High and long arm sewing machine with automatic thread trimmer, 1-needle, top and bottom-feed, lockstitch machine with double-capacity hook and automatic thread trimmer (2 pages)
Page 1
(now 31 pages). The original page numbers are retained for cross reference. NOTE : Congratulations on your purchase of a JUKI sewing machine. Be sure to read the description covered in the cautions for safety before using. Retain these cautions for safety for future reference.
TO ENSURE SAFE USE OF YOUR SEWING MACHINE For the sewing machine, automatic machine and ancillary devices (hereinafter collectively referred to as "machine"), it is inevitable to conduct sewing work near moving parts of the machine. This means that there is always a possibility of unintentionally coming in contact with the moving parts.
JUKI assumes no responsibility for damages or personal injury or death resulting from the use of the machine for any application other than the intended one.
(I) Table and table stand 1. Be sure to use JUKI genuine table and table stand in order to prevent accident that can result in per- sonal injury or death. If it is inevitable to use a table and table stand which are not JUKI genuine ones, select the table and table stand which are able to support the machine weight and reaction force during operation.
7. If the machine cannot be normally operated after repair or adjustment, immediately stop operation and contact JUKI or the distributor in your area for repair in order to prevent accident that can result in per- sonal injury or death.
Page 7
Model Description Industrial Sewing Machine Function make stitches and sew Applied harmonized standards, in particular : EN ISO12100, EN ISO10821, EN 50581 Manufacturer : JUKI CORPORATION 2-11-1, Tsurumaki, Tama-shi, Tokyo, Japan...
Page 8
Edit: This manual was created from the official 7-language, 101-page manual (downloaded from Juki Mar-2024). Non-english languages have been removed (now 31 pages). Original page numbers are retained for easy reference to the original.
Page 12
Then, run the sewing machine at the speed of 1,500 sti/min or more for 10 minutes to circu- late the oil in the sewing machine. Use JUKI Defrix Oil No. 1 (part number: MDFRX1600C0) or JUKI CORPORATION GENUINE OIL 7 (part number: 40102087) as the oil for the main shaft thread take-up lever potion.
Page 18
Edit: Close-up for the needle corrects an error. The official manual refers to points 12, 11, 14 (point 11 is outside the inset. Should be 13, the needlebar guide.)