Appliqué (2) - JUKI DX-2000QVP Instruction Manual

Appliqué (2)
66
Pattern
No.
Presser
foot
Seam allowance
Pattern paper
Basting
Pattern
number
Direct 6
Quilting 44~50
Manual buttonhole presser foot (I)
Open toe presser foot (O)
To make the stitch unconspicuous, an appliqué can be sewn.
1
Cut the appliqué fabric with seam
allowance of 3~5 mm.
2
Put the pattern paper onto the wrong side
of the fabric and fold the seam allowance
at the finish line.
3
Put the appliqué fabric on the base fabric.
Temporarily fix it with basting stitches or
glue.
4
Turn the hand wheel towards you and
start sewing along with the outer side of
the appliqué fabric.
* When sewing steep angles, keep the needle inside
the fabric, raise the presser foot, change sewing
direction and sew slowly.
5
Lock stitch at the end of sewing.
It is better to lock stitch at the outer side of the appli-
qué fabric.
* You can change the stitch base as you desire.
Changing needle position: Refer to page 89.
Attention
Turn OFF the
power switch
before replacing
the presser foot.