JUKI DX-2000QVP Instruction Manual page 13

Name and function of operational buttons
Zigzag width
1
adjustment dial
Stitch length
2
adjustment dial
Confirmation
3
button
Selection button
4
Clear button
5
Automatic lock
stitch and thread
6
trimming button
Float function
button
7
Continuous
stitch button
8
Mirror Image
button
9
Option button
!0
Save/call button
!1
Pattern selection
button
!2
Pattern selection
mode switching
!3
button
This is used to change the zigzag width and the needle position.
This is used to change the stitch length.
In the case of the free motion, this dial is used for adjusting the presser foot height.
This is used to confirm the selected stitch pattern and/or settings.
This is used to move the cursor.
This is used to delete the selected stitch pattern and to cancel each setting.
When pressing the button continuously, all the saved stitch patterns will be deleted.
When this button is pressed,
The machine will automatically lock stitches at sewing-start and sewing-end and
then trim both threads.
When this button is pressed,
When using the float function, the sewing machine performs sewing with its presser
foot slightly lifted.
This function is used in the case of sewing materials such as velvet or sewing quilt-
ing that is likely to cause cloth slippage between two layers.
Another press on this button cancels this function.
(Refer to page 96 for more details.)
This button is valid only when "
When this button is pressed,
on the screen.
When this button is pressed again,
played on the screen.
(The interval between letters and figures cannot be changed.)
The machine will sew the selected stitch patterns continuously.
When it is pressed again, the machine will cancel this function.
* When it is pressed while sewing, the machine will stop after the selected patterns
are sewn completely.
After selecting a stitch pattern, press this button to make a mirror image of the se-
lected pattern.
* There are some patterns that can not make a mirror image.
* For the symmetric pattern, the sewing start position is changed and ▼ is displayed.
Optional functions (19 functions) can be set.
* Optional functions vary from stitch pattern to stitch pattern.
(Refer page 87 for more details.)
This is used to save and/or call a pattern. The machine can save maximum 10 pat-
terns. (Refer to page 84 for more details.)
A stitch pattern can be selected.
* Usage of the buttons varies by pattern selecting mode.
(Refer to page 32 for more details.)
When the pattern selection mode needs to be changed, press the desired button.
The selected button will be illuminated.
or is displayed on the screen.
is displayed on the screen.
" mode.
(Continuous stitch with large intervals) is displayed
(Continuous stitch with small intervals) is dis-
11