How To Ensure Your Fireplace Cannot Be Turned On Inadvertently - Valor 1800JN Installation & Owner's Manual

OWNER'S
INFORMATION
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don't want it on.
Fireplace
Receiver Gas valve
The receiver and gas valve are located on the bottom of the
fi replace behind the front panel. The battery holder is located
next to the wall switch.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
• Turn the dial on the gas valve from the ON position
to the MAN position as shown. Turning the dial to
MAN (arrow up) will ensure that the main burner can
not come on. The pilot will remain on if it is lit.
Gas valve
• Alternately, remove all batteries from the battery
holder next to the wall switch as well as the battery
from the handset.
Automatic Shut-Off (in certain conditions)
Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 15 in the Remote Control
Operation section for a description of this feature.
10
Owner's Information
Battery holder
& wall switch