Valor 1800JN Installation & Owner's Manual page 44

QUALIFIED
INSTALLER
3. Place the center rear log fi tting the log's pegs into
the holes of the platform as indicated.
4. Place the center front log fi tting the log's pegs into
the holes of the platform as indicated.
5. Place centre cross log fi tting the peg at its front end
into the hole in the platform and resting its rear end
into the recess on top of the rear log as indicated.
44
Installation
6. Place the right rear log at the right hand side of
the burner fi tting the log's peg into the hole of the
platform as indicated. Rotate the front end of the log
if necessary to ensure it rests under the front edge
of the fi rebox.