Valor 1800JN Installation & Owner's Manual page 45

7. Place the right cross log into the front notch of the
rear log; its peg serves here as a hook to maintain it
in position. Pivot the other end of the log to rest on
the edge of the vermiculite bed as indicated.
WARNING
!
CHOKING HAZARD! Ensure that the fi replace
area is clear of vermiculite particles as these could
be ingested by small children. Vacuum area after
installation.
Driftwood Kit installed
Installation
8. Place the rocks on the platform as shown below.
Some of the rocks can be used to hide the platform
seam or the protruding corners of the burner. You
can also place one or two rocks on the vermiculite
as shown. Ensure that there is no rocks too close to
the pilot area.
Driftwood Kit installed—left side
Driftwood Kit installed—right side
Driftwood Kit installed—middle
QUALIFIED
INSTALLER
Pilot area
45