Valor 1800JN Installation & Owner's Manual page 7

Clean the barrier screen dusting it with a soft brush.
Clean the fi rebox ceramic logs/rocks and walls dust-
ing them with a soft brush. Dust can also be removed
from the burner using a soft brush after removing the
ceramic logs. When cleaning, make sure that no par-
ticles are brushed into the slots of the burner.
WARNING
!
CHOKING HAZARD! Ensure that the fi replace
area is clear of fi reglass or vermiculite particles as
these could be ingested by small children. Vacuum
thoroughly around the fi replace area after cleaning.
To refi t the window:
1. Place the window in its bottom railing. Ensure to
remove any vermiculite or glass particles in the
railing before installing the window.
Bottom railing
2. Push the top
of the window
frame against
the fi rebox.
Owner's Information
Window frame
2
1
3. While you hold it, pull and hook the side levers back
to the window brackets on each side.
3
4. Apply fi rm hand pressure around the window frame to
ensure the window is sealed tight against the fi rebox.
DANGER
!
The window unit must be correctly installed,
fastened and sealed after servicing or serious
bodily injury and/or damage to the appliance
may result.
To ensure a safe operation:
• Double-check that the bottom of the window
frame is correctly installed in the bottom
support railing;
• Verify that the levers are hooked properly to
the window tabs then;
• Pull out the top of the window and release it
to insure the springs return it;
• Ensure the window is sealed before operation.
WARNING
!
Failure to install the window correctly can
leak carbon monoxide, affect the performance
of the fi replace, damage components, cause
overheating resulting in dangerous conditions.
Damage caused by incorrect window installa-
tion is not covered by the Valor warranty.
OWNER'S
INFORMATION
7