Korg HAVIAN 30 User Manual page 407

g Output Level
Src
Amt
h Wet/Dry
Src
Amt
a: Envelope Select
This parameter selects whether the left and right channels are linked to
control both signals simultaneously, or whether each channel is controlled
independently.
b: Sensitivity
g: Output Level
The "Sensitivity" parameter sets the sensitivity of the compressor. If this
parameter is set to a higher value, lower level sounds will be boosted. With
a higher Sensitivity, the overall volume level is higher. To adjust the final
volume level, use the "Output Level" parameter.
Level
Wet
Dry
0...100 Sets the output level of the compressor
Off...Tempo Selects the modulation source for the
compressor output level
–100...+100 Sets the modulation amount for the
compressor output level
Dry, Sets the Balance between the wet and
1:99...99:1, dry signal
Wet
Off...Tempo Selects a modulation source for Wet/
Dry
–100...+100 Sets the modulation amount for Wet/Dry
Compressor - Sensitivity
Sensitivity=100
Sensitivity=40
Time
Dynamics (Dynamic) |403