Korg HAVIAN 30 User Manual page 534

530| Effects for the MIDI Sounds
d High Damp [%]
Low Damp [%]
e LFO Waveform
Shape
LFO Phase
f Panning Freq [Hz]
g MIDI Sync
BPM
Base Note
Times
h Panning Depth
Src
Amt
i Wet/Dry
Src
Amt
0...100 Sets the damping amount in the high
range
0...100 Sets the damping amount in the low
range
Triangle, Sine Selects the LFO Waveform
–100...+100 Changes the curvature of the LFO
Waveform
–180...+180 Sets the LFO phase difference between
the left and right
0.02...20.00 Sets the panning speed
Off, On When this is on, the pan LFO speed is set
by BPM, Base Note, and Times, instead
of Frequency
MIDI, MIDI syncs to the system tempo; 40–300
40.00... sets the tempo manually for this individ-
300.00 ual effect
Selects the type of notes to specify the
...
delay time for the panning speed
x1...x32 Sets the number of notes to specify the
delay time for the panning speed
0...100 Sets the panning width
Off...Tempo Selects the modulation source for the
panning width
–100...+100 Set the modulation amount of the panning
width
Dry, Balance between the wet and dry signal
1:99...99:1,
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source