Korg HAVIAN 30 User Manual page 297

3 Choose the Step
Backing Sequence
Event list
Step controls
Recording
While in edit, the events at the current position are shown by the right-point-
ing arrowheads ( ) on the left of the event.
1 Use the Measure
ing the VALUE
As an alternatively, you can move the locator by using the
the lower area of the display.
Step control
Event
Step
Measure
2 Select a parameter type
delete at the current position.
3 Use the VALUE
Del button next to the event. When editing a parameter without the arrow-
head ( ) next to it, a new event is inserted at the current position.
Step Recording a Backing Sequence Song |293
Backing Sequence
page.
parameter to go to the desired position in the Song, by us-
dial.
Meaning
Use these buttons to move to the previous or next recorded event.
Use these buttons to go to the previous or next step (1/8, or 192
ticks). If an event is located before the previous or next step, the
locator stops on that event. For example, if you are positioned
on M001.01.000, and no event exists before M001.01.192, the >
button moves to the M001.01.192 location. If an event exists on
M001.01.010, the > button stops to the M001.01.010 location.
Use these buttons to move to the previous or following measure.
(Style, Performance, Tempo...) to insert, edit or
dial to modify the selected event. Delete it by touching the
option and touch
Position indicator
OK to access the Step
step controls in