Loading Data From I-Series Instruments - Korg HAVIAN 30 User Manual

Loading data from i-Series instruments

Havian 30 is compatible with the Styles of the older Korg i-Series instru-
ments. You can load them as if they were ordinary Havian 30 data.
1 Copy the old i-Series data into an USB device, or transfer them to the internal
memory of Havian 30.
2 Go to the Media > Load
3 Use the Device
data.
4 If you are reading an i30 file, select the SET folder, then touch the
button.
5 Select the STY folder.
6 At this point, you can load the whole STY folder, or open it and choose a
single Style.
▪
To load the whole folder, touch the
Styles, they will be loaded into the
will be prompted to select one of the
Style banks in memory. Once the target bank is selected, touch
the bank. The 'Are you sure?' message will appear. Touch
▪
To load a single Style, touch
a conversion will be started at this point, please wait some seconds for the
operation to be completed.
Select the Style to load, then touch Load. You will be prompted to select a
target location in memory. Once the target location is selected, touch
to load the Style. The 'Are you sure?' message will appear. Touch
firm.
Please note that loading a whole SET folder from an i30 file may take some
time due to format conversion.
7 Go to the Style Play
Tempo value, then choose the
the page menu
8 Due to the difference in Sounds, you will probably want to make some ad-
justments to the old Styles, once they are loaded in Havian 30 (changing the
Sound, Volume, Pan, Tempo, Drum Mapping, Wrap Around...).
9 To make the Sound assignment to the Style tracks effective, be sure the
Original Style Sounds
view).
10 Save the Style Settings again, by choosing the
command from the
Loading musical resources and settings |699
page.
pop-up menu to select the device containing the i-Series
Open
mode, and select (one of) the loaded Style. Adjust the
Write Current Style Settings
to write changes.
parameter is not checked
page menu.
Load button. If it contains more than 40
USER banks sequentially, otherwise you
USER Style banks or the
in the display to open the STY folder. Since
(Volume
Write Current Style Settings
Open
FAVORITE
Load to load
OK to confirm.
Load
OK to con-
command from
pane, Style track