Korg HAVIAN 30 User Manual page 556

552| Effects for the MIDI Sounds
COMPRESSOR
a [C]
Sensitivity
b [C]Attack
Output Level
c [C]EQ Trim
d [C]Pre LEQ Gain [dB]
Pre HEQ Gain [dB]
CHORUS/FLANGER
e [F]LFO Frequency [Hz]
LFO Waveform
f [F]Delay Time [msec]
Depth
Feedback
g [F]Cho/Flng Wet/Dry
Src
Amt
h [F]Output Mode
i Routing
j Wet/Dry
Src
Amt
h: [F]Output Mode
i: Routing
When Wet Invert is selected, the right channel phase of the chorus/flanger
effect sound is inverted. This creates pseudo-stereo effects and adds spread.
1...100 Sets the sensitivity
1...100 Sets the attack level
0...100 Sets the compressor output level
0...100 Sets the EQ input level
–15...+15 Sets the gain of Low EQ
–15...+15 Sets the gain of High EQ
0.02...20.00 Sets the speed of the LFO
Triangle, Sine Selects the LFO Waveform
0.0...1350.0 Sets the delay time
0...100 Sets the depth of LFO modulation
–100...+100 Sets the feedback amount
-Wet, -1:99... Sets the effect balance of the
Dry...99:1, Wet chorus/flanger
,
Off...Tempo Selects the Wet/Dry modulation
source for the chorus/flanger
–100...+100 Sets the Wet/Dry modulation
amount for the chorus/flanger
Normal, Selects the output mode for the
Wet Invert chorus/flanger
Switches the order of the com-
Comp ›
pressor and chorus/flanger
Flanger,
Flanger › Comp
Dry, 1:99...99:1, Balance between the wet and dry
Wet signal
Off...Tempo See DMS (Dynamic Modulation
Source)
–100...+100 Amount of modulation source