Korg HAVIAN 30 User Manual page 469

e Manual
Src
Amt
f Depth
Src
Amt
h Resonance
High Damp [%]
j Wet/Dry
Src
Amt
h: Resonance
i: Wet/Dry
The peak shape of the positive and negative Feedback value is different. The
harmonics will be emphasized when the effect sound is mixed with the dry
sound, if you set a positive value for both "Resonance" and "Wet/Dry", and
if you set a negative value for both "Resonance" and "Wet/Dry".
h: High Damp [%]
This parameter sets the amount of damping of the resonance in the high
range. Increasing the value will cut high-range harmonics.
Chorus, Flanger, and Phaser (Cho/Fln Phaser) |465
0...100 Sets the frequency to which the effect is
applied
Off...Tempo Selects the modulation source for the LFO
modulation
–100...+100 Sets the modulation amount of the LFO
modulation
0...100 Sets the depth of LFO modulation
Off...Tempo Selects the modulation source for the LFO
modulation depth
–100...+100 Sets the modulation amount of the LFO
modulation depth
–100...+100 Sets the resonance amount
0...100 Sets the resonance damping amount in
the high range
-Wet, -1:99... Balance between the wet and dry signal
Dry...99:1,
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source