Sound routing, polyphony, key and velocity
range
The
Mode
page is where you set the Internal/External status of the tracks,
and choose their type (Drum, Poly, Mono).
Using internal or external Sounds
Usually, the Keyboard, Arranger and Player play the internal Sounds.
However, you can choose to let them play an external sound generator.
Connect Havian 30 to the internal or external sound generator
1
Go to the
Track Control > Mode
2
Use the
Int/Ext
internal and/or external sound generation.
Int/Ext
Both
Internal
External
Sound routing, polyphony, key and velocity range |159
page.
parameter to connect the corresponding part/track to the
Meaning
The track plays both the internal sounds and an external instrument
connected to the USB HOST port.
The track plays the sounds generated by the internal sound gen-
erator. It does not play an external instruments connected to the
USB HOST port.
The track plays an external instrument (hardware or software) con-
nected to the USB HOST port. The connected device must receive
data on the MIDI channel associated with this track on the Havian
30.