150|
Advanced editing of the Sound sets
Choosing the FX group and setting the FX Send level
Each Sound can send its audio signal to a group of FX processors. The
amount of signal sent is called the FX Send level.
Access the FX Send page
▪
Go to the
Mixer/Tuning > FX Send
Choose the FX Group
In Style Play and Song Play mode, the FX group is fixed and you cannot
choose it (you can only see it). In Sequencer mode you can freely choose it
for each Song track.
▪
On each mixer channel, use the
FX group.
FX Group
A
B
Set the FX Send level
▪
On each mixer channel, use the
level of the direct (dry) signal sent to the corresponding FX processor (inside
the selected FX group).
Master 1/2
0...127
page.
FX Group
Meaning
FX group A
FX group B
Master 1
Meaning
FX Send level in MIDI values
pop-up menu to see or choose the
and
Master 2
knobs to control the