9: Stereo Isolator - Korg HAVIAN 30 User Manual

9: Stereo Isolator

This is a stereo effect that separates the input signal into low, mid, and high-
frequency bands, and controls the volume of each band independently. For
example you can separately boost or cut the kick, snare, and hi-hat sounds
from a drum signal in realtime.
Stereo In - Stereo Out
Left
Trim
Isolator
Trim
Right
D
-mod
D
-mod
D
-mod
a Trim
b Low/Mid [Hz]
c Mid/High [Hz]
d Low Gain [dB]
Src
Amt
e Mid Gain [dB]
Src
Amt
f High Gain [dB]
Src
Amt
Low
Mid
High
Low
Mid
High
0...100 Sets the input level
100...500 Sets the frequency at which the low
and mid bands are divided
2000...6000 Sets the frequency at which the mid
and high bands are divided
–Inf, Sets the low-frequency gain
–59...+12
Off...Tempo Selects the source that will modulate
low-frequency gain
–72...+72 Sets the amount by which the low-
frequency gain will be modulated
–Inf, –59...+12 Sets the mid-frequency gain
Off...Tempo Selects the modulation source for
mid-frequency gain
–72...+72 Sets the amount by which the mid-
frequency gain will be modulated
–Inf, –59...+12 Sets the high-frequency gain
Off...Tempo Selects the modulation source for
high-frequency gain
–72...+72 Sets the amount by which the high-
frequency gain will be modulated
EQ and Filters (EQ/Filter) |417
FX Amt
FX Amt