Connecting Havian 30 To A Personal Computer Or Tablet; Connections And Settings; The Sounds - Korg HAVIAN 30 User Manual

Connecting Havian 30 to a personal
computer or tablet
You can program a new song on a personal computer or tablet connected to
Havian 30. The computer has to run some sequencing or notation software.
When a song is ready, you can transfer it to the internal memory of Havian
30, and read it with the internal Player.

Connections and settings

1 Install the Korg USB MIDI Driver, as explained above.
2 Connect Havian 30 and the computer or tablet via the
3 On the computer, activate the
ware's user manual).
4 On Havian 30, go to the
the External Sequencer
5 Still in the Global > MIDI > General Controls
On checkbox to set the instrument to the
6 Press the SEQUENCER
7 Play the keyboard.
Notes played on the keyboard will go from the USB port of Havian 30 to the
USB port of the computer or tablet. Notes generated by the computer are
sent from the USB port of the computer to the USB port of Havian 30.

The Sounds

The song that is played back by the sequencer can select Havian 30 Sounds
through the MIDI messages Bank Select MSB, Bank Select LSB (bank selec-
tion, two messages), and Program Change (Sound selection). See the list of
Sounds and corresponding MIDI values in the Appendix.
As a hint for those who program songs on computer: even though it is not
mandatory, for a wider compatibility you should set bass on channel 2, mel-
ody on channel 4, drum kit on channel 10, controls for an harmonizer on
channel 5.

Connecting Havian 30 to a personal computer or tablet |683

MIDI Thru
Global > MIDI > General Controls
or Tablet
button to go to the
function (please refer to the soft-
MIDI Preset.
page, deselect the
Local Off status.
Sequencer
USB DEVICE port.
page and choose
Local Control
mode.