Korg HAVIAN 30 User Manual page 438

434| Effects for the MIDI Sounds
e Depth
Src
Amt
f Resolution
g Output Level
Src
Amt
h Wet/Dry
Src
Amt
a: Pre LPF
If a sampler with a very low sampling frequency receives very high-pitched
sound that could not be heard during playback, it could generate pitch noise
that is unrelated to the original sound. Set "Pre LPF" to On to prevent this
noise from being generated.
If you set the "Sampling Freq" to about 3 kHz and set "Pre LPF" to Off, you
can create a sound like a ring modulator.
f: Resolution
g: Output Level
If you set a smaller value for the "Resolution" parameter, the sound may
be distorted. The volume level may also be changed. Use "Output Level" to
adjust the level.
0...100 Sets the depth of the sampling frequen-
cy LFO modulation
Off...Tempo Selects the LFO modulation source of
the sampling frequency
–100...+100 Sets the LFO modulation amount of the
sampling frequency
4...24 Sets the data bit length
0...100 Sets the output level
Off...Tempo Selects the modulation source for the
output level
–100...+100 Sets the modulation amount of the out-
put level
Dry, Balance between the wet and dry sig-
1:99...99:1, nal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source