344|
Editing the Sounds
Layer and velocity switch
After having selected a key to edit, choose the velocity layer.
Choosing the layer to edit
▪
Use the
radio buttons
to select the layer to edit. The available number of layers depend on the
Layers pop-up menu above.
Editing the velocity switches
Each of the
velocity switch values
Switch
area separates two adjacent layers of the selected key. Notes strick-
en harder than a velocity switch will be played by the layer on the right, while
notes stricken softer are played by the layer on the left.
The first and last values are not editable, and are always 001 and 127 (re-
spectively).
Choosing and setting the drum samples
Use the
Drum Sample
velocity layer inside the selected key.
Choosing a drum sample
▪
Use the
Drum Sample
layer. You can use velocity to switch between the available samples.
and
Level
can be adjusted independently for the various drum samples.
Use the
pop-up menus
only available in some models).
in the
Layer Selector & Velocity Sample Switch
in the
section to assign a percussive sample to the selected
parameters to assign a different drum sample to each
to choose the
bank
Layer Selector & Velocity Sample
(ROM or RAM). (The RAM bank is
area
Offset