S-Registers - Multitech MultiModem MT5634ZPW-PCI Owner's Manual

Owner's Manual
Command: %T125 Testing DSP 56K Code Version/Checksum
Values:
Description:

S-Registers

S-registers generally affect how the AT commands perform. You
can read or alter the contents of an S-register by using the S
command (see "AT Commands").
Register Unit
S0 rings
S1
rings
S2 decimal
S3 decimal
S4
decimal
S5 decimal
* These values may be different outside North America.
48
n/a
Entering AT%T125<cr> tests the DSP56K code
version and checksum running in external RAM.
Upon issuing this command the user may then issue
ATI4<cr> to get DSP version or ATI1<cr> to get DSP
checksum in RAM.
Entering AT%T124<cr> tests the DSP56K code
version and checksum running in internal ROM.
Upon issuing this command the user may then issue
ATI4<cr> to get DSP version or ATI1<cr> to get DSP
checksum in ROM.
Range Default
0, 1–255 0
0–255 0
0–127 43 (+)
128–255
0–127 13 (^M) Sets ASCII code for the carriage
0–127 10 (^J)
0–32 8 (^H)
33–127
Description
Sets the number of rings before
the modem answers. ATS0=0
disables auto-answer completely.
Counts the number of rings that
have occurred.
Sets ASCII code for the escape
character. Values greater than
127 disable the escape sequence.
return character.
Sets ASCII code for the line feed
character.
Sets ASCII code for the backspace
character. Values greater than 32
disable the backspace character.
MT5634ZPW-PCI