Table of Contents
Advertisement
AT Commands
This section summarizes your modem's AT commands. For detailed
information on the commands, download ZPW-PCIHELP.EXE from
the Multi-Tech BBS (see "Call the Multi-Tech BBS" in Chapter 3).
Note: Some dialing and answering defaults and restrictions may
vary for international modems. Changing settings may cause a
modem to become non-compliant in specific countries. Also note
that some software packages may have features, or lack restrictions,
that may cause the modem to become non-compliant.
Command: +++AT<CR> Escape Sequence
Values:
Description:
Command:
AT
Values:
Description:
Command:
ENTER Key
Values:
Description:
Command:
$
Values:
Description:
Command:
A
Values:
Description:
MT5634ZPW-PCI
3 AT Commands, S-Registers and Result Codes
n/a
Puts the modem in command mode (and optionally
issues a command) while remaining online. Type
+++AT and up to ten command characters, then
press ENTER. Used mostly to issue the hang-up
command: +++ATH<CR>.
Attention Code
n/a
The attention code precedes all command lines
except A/ and the escape sequence.
n/a
Press the ENTER key to execute most commands.
Detect AT&T's "call card" tone
n/a
This symbol placed in dialing string enables the
modem to detect AT&T's "call card" tones to access
user's calling card when originating an on-line
connection--
Answer
n/a
Answer an incoming call before the final ring.
37
Advertisement
Table of Contents
