Page 2
(800) 972 -2439 (763) 717-5863 Trademarks Multi-Tech Registered Trademarks: MultiModem ZPX, MultiModem, Multi-Tech, and the Multi-Tech logo. All other brand and product names mentioned in this publication are trademarks or registered trademarks of their respective companies. World Headquarters Multi-Tech Systems, Inc.
MultiModem ZPX Quick Start Guide Product Description The MultiModem® ZPX V.92 internal modem is the ideal choice for small- to medium-sized businesses that are looking for a remote device management solution. The MultiModem ZPX internal modem provides higher speeds and reduces transfer times. It includes a built- in processor to enhance performance and data throughput.
MultiModem ZPX Quick Start Guide Step 1 - Determine System Resources Before you physically install your new MultiModem ZPX, you need to determine which system resources your system is using. The best way to check which resources are in use and which ones are available is to run the WINMSD Utility.
Page 5
MultiModem ZPX Quick Start Guide The MultiModem only uses IRQs 3,4, and 5 so you need to check in the above screen to see if any of these IRQs are available. The MultiModem is defaulted to IRQ 5. Record the available IRQ that you are going to use ___________.
MultiModem ZPX Quick Start Guide Step 2 - Configure Jumpers The MT5634ZPX board contains seven jumpers for setting the interrupt request (IRQ) number and COM port assignment. The jumpers are located on the lower part of the PC board as shown below. The IRQ number is set using jumpers 1, 2, and 3 and the COM port assignment is set using jumpers 4 through 7.
MultiModem ZPX Quick Start Guide Turn off the computer and unplug it. Failure to do so may result in damage to both the MultiModem ZPX and the computer. Do not turn on the computer until the instructions tell you to do so.
Step 5 - Run Add Modem Wizard Download the driver zip file for modem model MT5634ZPX-V92 from www.multitech.com/setup/product.go. Extract the zpxisa.inf file to your hard drive. Note the location where you saved the zpxisa.inf file. Click on Start I Control Panel and double-click Phone and Modem Options.
MultiModem ZPX Quick Start Guide Click Query Modem. The system will pause for a few seconds while trying to access the modem. The modem will respond to the AT commands sent by the system. The modem response will display in the Command I Response pane.
The Global Wizard configuration utility is recommended for computers running Windows 98 or newer. Go to www.multitech.com/setup/product.go and select the software tab for modem model MT5634ZPX-V92. Click the link for the Global Wizard exe file. The File Download window opens.
Page 11
MultiModem ZPX Quick Start Guide To verify the change, type ATI9, and then press Enter. The country code is displayed in decimal format. Example of country, command and result codes Country AT command (hexadecimal) Result code (decimal) Euro/NAM AT%T19,0,34 (default)
Page 12
MultiModem ZPX Quick Start Guide Patents This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; D394,250; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725; D374,222;...
Need help?
Do you have a question about the MultiModem ZPX and is the answer not in the manual?
Questions and answers