Multitech MultiModem MT5634ZPW-PCI Owner's Manual page 42

Owner's Manual
X n
Command:
Values:
Default:
Description: X0
X1
X2
X3
X4
X5
X6
X7
Command: Y n
Values:
Default:
Description: Y0
Y1
Command: Z n
Values:
Default:
Description: Z0
Z1
Command: &B n
Values:
Default:
Description: &B0
&B1
42
Result Code Selection
n = 0–7
4
Basic result codes ( e.g., CONNECT ); does not look
for dial tone or busy signal.
Extended result codes ( CONNECT 56000 V42bis,
CONNECT 33600 V42bis , etc.); does not look for dial
tone or busy signal.
Extended result codes with NO DIALTONE ; does not
look for busy signal.
Extended result codes with BUSY ; does not look for
dial tone.
Extended result codes with NO DIALTONE and
BUSY .
Extended result codes with NO DIALTONE and
BUSY .
Extended result codes with NO DIALTONE and
BUSY .
Basic result codes with NO DIALTONE and BUSY .
Long Space Disconnect
n = 0
0
Disable sending or responding to long space break
signal on disconnect.
Enable sending or responding to long space break
signal on disconnect. (Not supported.)
Modem Reset
n = 0 or 1
None
Reset modem to profile saved by the last &W
command.
Same as Z0.
V.32 Auto Retrain
n = 1
1
Disable V.32 auto retrain. (Not supported.)
Enable V.32 auto retrain.
MT5634ZPW-PCI