Install The Multimodemzpw-Pci Into The Computer - Multitech MultiModem MT5634ZPW-PCI Owner's Manual

Install the MultiModemZPW-PCI into the
Computer
Installation of the MultiModemZPW-PCI requires you to open
your computer. Please consult the computer manual in addition
to the following instructions:
1. Turn off the computer and unplug it. Failure to do so may
result in damage to both the MultiModemZPW-PCI and the
computer. Do not turn the computer on until the instructions
tell you to do so.
2. Remove the cover from the computer as instructed in the
computer manual.
3. Select an empty PCI slot. Remove the expansion slot cover
and save the retaining screw.
4. Before handling the MultiModemZPW-PCI, discharge any
static in your body by touching a piece of grounded metal
such as a water faucet. Carefully remove the
MultiModemZPW-PCI from its anti-static bag, handling it
only by the mounting bracket and edges. Do not touch the
gold-plated connectors along the bottom edge.
5. Placing the MultiModemZPW-PCI directly above the PCI
slot, gently but firmly push it into the connector until the
card's retaining bracket is flush against the computer
chassis.
6. With the screw you saved in step 3, fasten the retaining
bracket to the computer chassis.
7. Replace the cover of the computer.
MT5634ZPW-PCI
2 Installation
19