Sound Card Considerations - Multitech MultiModem MT5634ZPW-PCI Owner's Manual

Owner's Manual

Sound Card Considerations

If you want speakerphone functions along with the ability to
record sound or .WAV files through the sound card at the same
time, you need:
• two stereo PC microphones
• one stereo male-to-male patch cord
• one sound card and optional speakers
To connect a 3rd party sound card, perform the following steps:
1. Obtain a stereo male-to-male patch cord (can be purchased
at a local PC retail store).
2. Place one end of a stereo male-to-male patch cord into the
"LINE OUT" jack of the MultiModemZPW-PCI and the other
end into the "LINE IN " jack of the sound card. This lets you
to hear the activity of the modem whether it is originating or
answering a call or playing a recorded message using the
bundled Trio software.
3. Place the two stereo microphones (do not use mono
microphones) far enough apart from each other to eliminate
feedback (e.g., one on each side of the monitor). Feedback
will only occur if the microphones are too close to each
other. Make sure speakers are amplified with power source
being either a battery or AC outlet.
4. Place the microphone and speakers far enough apart from
each other to eliminate feedback. Plug the connector of
both microphones into the "MIC IN" jack of both the
SoundCard and the MultiModemZPW-PCI.
18
MT5634ZPW-PCI