SETTING FLASH GROUPS
Setting Flash Groups on the
Aviator Transceiver in Master Mode
The Aviator Transceiver allows individual
control of flash settings for groups A, B and
C. It can also fire all groups simultaneously.
To set the mode of a particular
flash group, do the following:
1. Press the desired group to toggle
through the modes, ( between TTL,
Manual and OFF)
18
Group
A
Flash Group
Mode Setting
Setting Flash Groups on the
Aviator Transceiver in Slave Mode
When the Transceiver is in Slave mode, set
the desired group by pressing A, B, or C.
Slave
Mode