SETTING AUTO-FOCUS ASSIST (NIKON ONLY)
To configure your Nikon flash's Auto-Focus
Assist (AF Assist) from the Transceiver:
1. Make sure your flash's AF Assist is
turned on (see your flash's manual)
2. From the TTL Screen, press the Menu
button three times
3. Press + or − to turn AF Assist On
or Off
4. Press Select to apply the setting.
Note: for turning off a Nikon Camera's
AF light, see your cameras manual.
Note: for Canon systems, AF illumination is controlled directly by the flash (see your flash's manual)
AF Assist
Setting
27