Related Manuals for Vello Freewave Plus
Summary of Contents for Vello Freewave Plus
- Page 1 FREEWAVE PLUS USER MANUAL...
- Page 2 Your Vello FreeWave Plus camera around corners. to approach, such as wildlife. It also Wireless Remote Shutter Release The FreeWave Plus uses the 2.4GHz Kit contains: eliminates vibrations caused by pressing wireless frequency for extended your camera’s shutter release button Wireless Transmitter range and reduced interference.
-
Page 3: Key Features
KEY FEATURES 2.4GHz Radio Frequency: Reduced Multi-exposure: Take multiple shots with interference and improved wireless one press of the trigger. signal quality. Long Exposure: Control the length of the Extended Range: up to 100m (320 ft.) exposure remotely. 16 Possible Channels: One transmitter Multi-function: Trigger your camera can trigger multiple receivers. -
Page 4: Before You Begin
Any combination will work so long as the switches are set identically in both the Transmitter and Receiver of a single FreeWave Plus set. A total of 16 different combinations can be selected. Insert 2 AA batteries into both the... -
Page 5: Safety Warnings
• Turn off the camera’s power before certain to align batteries with correct inserting or removing the remote cord. • Do not operate the FreeWave Plus in polarity. the presence of flammable gas or vapors. • Dispose used batteries, packaging, •... -
Page 6: Features Diagram
FEATURES DIAGRAM Confirmation LED Confirmation LED Receiver Mode Selector Power Button Shutter Button Power Button Single Shot Transmitter Continuous Shooting Battery Compartment Bulb Shooting Self Timer Battery Compartment... -
Page 7: Powering On And Off
POWERING ON & OFF Turn ON the Receiver: Press and hold There is no need for a power button the Power button for 2 seconds. The on the transmitter. The Transmitter LED will flash red at 2 second intervals to is always ready to fire and uses power indicate that the receiver is working. -
Page 8: Mounting The Receiver
MOUNTING THE RECEIVER If using the FreeWave wirelessly, mount the Receiver on your camera’s hot shoe, facing forwards or backwards. If your camera’s hot shoe is in use, you can use an accessory shoe to attach the Receiver to your camera, tripod, or other suitable surface. - Page 9 SINGLE SHOTS | WIRELESS 1. Turn on the Receiver by pressing and holding the Power button until the LED lights up. 2. Set the Transmitter to Single Shot. 3. Set your camera to the Single Shot setting. 4. Press and hold the Transmitter’s shutter release button halfway to wake or focus your camera (if set to Auto Focus).The LED will turn green.
- Page 10 FOUR SECOND DELAY | WIRELESS 1. Turn on the Receiver by pressing and 5. Fully depress the shutter button on the Transmitter. The LED will turn red holding the Power button until the and the shutter will be triggered after a LED lights up.
- Page 11 CONTINUOUS MODE | WIRELESS 1. Turn on the Receiver by pressing and 4. Press and hold the Transmitter’s continuous photos until you half press holding the Power button until the shutter release button halfway to wake or fully press the shutter button again. LED lights up.
- Page 12 CONTINUOUS MODE AT 1 SECOND INTERVALS | WIRELESS 1. Turn on the Receiver by pressing and 3. Set your camera to the Single Shot 5. A full press of the Transmitter’s holding the Power button until the LED setting. shutter button will trigger the camera lights up.
- Page 13 BULB MODE (LONG EXPOSURE) | WIRELESS 1. Turn on the Receiver by pressing and 5. Fully depress the Transmitter’s shutter holding the Power button until the LED button. The LED on the Transmitter lights up. will flash red and the LED on the receiver will turn solid red.
- Page 14 SINGLE SHOTS | WIRED 1. Press and hold the Receiver’s shutter The FreeWave Plus Receiver can also be used as a wired, off-camera shutter release button halfway to wake or focus release. your camera (if set to Auto Focus). The confirmation LED will not display,...
- Page 15 CONTINUOUS MODE | WIRED 1. Set your camera to the Continuous your camera (if set to Auto Focus). 3. A full press of the Receiver’s shutter Shots setting. The confirmation LED will not display, button will trigger the camera to take so be sure to manually focus or allow continuous photos until you release the 2.
- Page 16 BULB MODE (LONG EXPOSURE) | WIRED 1. Set your camera to Bulb mode. 2. Press and hold the Receiver’s shutter release button halfway to wake or focus your camera (if set to Auto Focus). The confirmation LED will not display, so be sure to manually focus or allow the camera to Auto Focus without confirmation.
-
Page 17: Specifications & Troubleshooting
SPECIFICATIONS & TROUBLESHOOTING Troubleshooting Transmitter Receiver Problems with the FreeWave Plus can usually be Power 2 x AAA 2 x AAA traced to the following most common causes. Perform the following steps to diagnose and Battery Life 3 Years 300 Hours... -
Page 18: Fcc Compliance
FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. -
Page 19: One-Year Limited Warranty
This VELLO product is warranted to the This warranty does not cover damage or number, and return the defective product to Vello along with the RMA number and proof of original purchaser to be free from defects defect caused by misuse, neglect, accident, purchase. - Page 20 All other trademarks are the property of their respective owners. © 2014 Gradus Group LLC. All Rights Reserved.