Mounting A Hot-Shoe Flash To A Receiver/Transceiver - Vello Freewave Aviator User Manual

MOUNTING A HOT-SHOE FLASH TO A RECEIVER/TRANSCEIVER

1. Make sure the flash and Receiver or
Transceiver are turned Off.
2. Switch the flash's locking switch to the
unlocked position.
3. Insert the flash's hot-shoe foot into
the Receiver or Transceiver's hot-shoe
mount.
4. Switch the flash's locking switch to the
locked position.
5. Turn on the flash.
6. Your flash must be in TTL mode in order
to function properly in all modes with
the FreeWave Aviator. (See your flash's
manual for assistance.)
7. Turn on your Aviator Receiver or
Transceiver by moving the switch to the
On position.
13