Vello Freewave Aviator User Manual page 19

Setting the Group on the
Aviator Receiver
Slide the Group switch on the
Aviator Receiver to the desired
Group (either A, B, or C).
To assign multiple Receivers to the same
flash group, simply select the same group
letter for each Receiver in the flash group.
Note: you can combine studio lights
and speedlights within the same flash
group. (Be aware of the independent
recycling time of each flash to ensure
all flash units are ready to fire).
Note: the Group D setting is reserved for
factory calibration and is not available for use.
19