About Flash Groups - Vello FWIRC-N User Manual

ABOUT FLASH GROUPS

On the FreeWave IR Commander,
three flash groups (A, B, and C) are
available, with independent control
over all three groups. For example,
you can set one group to i-TTL
mode and another to manual mode.
You can also combine multiple slave
flashes within the same group.
When setting groups on the
Commander, make sure to set your
slave flashes to the corresponding
groups. To disable a group, choose
the "- - -" setting on the Commander.
Any flashes in this group will not fire.
Flash Groups Disabled Flash Group
Note: Be aware of the independent
recycling time of each flash to ensure
all flash units are ready to fire.
15