MOUNTING THE RECEIVER
1. With your Receiver and flash Off, mount
the Receiver to your 1/4˝-20 light stand
or accessory stand. Take care not to
overtighten the Receiver.
2. Slide the Group Switch to A, B, or C to
select the desired Group. (The Group
D setting on the Receiver is for factory
calibration only and is not available
for use.)
3. Slide the Channel Switch to 1, 2,
3, or Auto. ("Auto" is equal to the
Transceiver's Channel "4".)
Note: make sure that all your FreeWave Aviator units are set to the same channel before use.
12