Setting Up The Receiver - Vello Freewave micro User Manual

6
INSTRUCTIONS
To get the most from your FreeWave Micro Wireless Remote Control,
please read this manual.

Setting Up the Receiver

The camera must have a 10-pin
remote terminal in order to
connect with the FreeWave Micro
Wireless Receiver. Please see
the compatible camera list on
page 12.
1. Insert the socket of the
receiver, with the antenna
pointed up, into the camera's
10-pin remote terminal.
2. Turn the receiver slightly
until you feel that it's seated
properly in the terminal.
3. When you have correctly
aligned the receiver with the
10-pin remote terminal, turn
the locking wheel clockwise
until the receiver is securely
connected to the camera.