Setting The Channels - Vello FreeWave Flash Trigger LR User Manual

SETTING THE CHANNELS

The Vello FreeWave Flash Trigger LR
transmitter and receiver can communicate
via your choice of eight different channels.
To change the channel on the transmitter
or receiver, turn on the device and
press the up or down channel selector
button until the desired channel appears
on the channel indicator panel.
The transmitter can be set to trigger all
of the units connected to Vello FreeWave
Flash Trigger LR receivers regardless
of the receivers' channel selection. To
activate this function, press the all-channel
selector button. To return to individual
channel selection on the transmitter, press
the all-channel selector button again and
select individual channel desired using the
up or down channel selector button.
Note: The FreeWave Flash Trigger LR Transmitter
and Receiver will remember the channel setting
selected even when the unit is turned on/off,
making it easy to return to your selected channel
at your next session.
Note: If you encounter any interference on the
initial setting, try changing the channel.
11