Adjusting A Flash Group's Zoom - Vello Freewave Aviator User Manual

ADJUSTING A FLASH GROUP'S ZOOM

The FreeWave Aviator has the ability
to refine your flash output by adjusting
a flash group's zoom. This function
controls the concentration and diffusion
of light emitted by your flash.
Using a Transceiver in Master mode:
1. From the TTL Screen, press Select
twice to enter Zoom Select.
2. Press A, B, or C to select the desired
Group.
3. Use + and − buttons to set the zoom
level (Auto, 24, 28, 35, 50, 70, 80, or 105
mm) for the selected group (Auto is one
level below 24 mm and appears as "Au").
4. Press Select when done to apply the
setting.
5. Press /Test to confirm settings.
21