Mounting/Turning On The Transceiver - Vello Freewave Aviator User Manual

MOUNTING/TURNING ON THE TRANSCEIVER

1. With your camera and Transceiver Off,
loosen the Transceiver's locking ring.
2. Insert the Transceiver's hot shoe on
your camera's hot-shoe mount with the
LCD panel facing the rear of the camera.
3. Tighten the Transceiver's locking ring.
4. Turn on the Camera and then slide the
Transceiver's Power Switch to On.
5. Slide to Off position to turn the
Transceiver off.
Note: the Aviator Transceiver can also be mounted on any hot-shoe or cold-shoe compatible stand.
Note: make sure that your Master
Transceiver and all Receiver units and Slaves
are set to the same Channel before use.
11