Creating And Using Department Codes; Enabling Department Codes; Enabling Department Code Enforcement; Creating The Master Department Code - Toshiba GL-1020 Administrator's Manual

CREATING AND USING DEPARTMENT CODES

180
The e-STUDIO550-810 Electronic Document Processing System
uses counters to keep track of the number of pages printed,
copied, and scanned. It displays these statistics as totals or by
department.
Each department has a name and a corresponding five-digit code.
With the department code feature enabled, if you enter a
department code when using the printer drivers, the controller
adds the number of printed pages to the counter for that
department. When no department codes exist, the system assigns
all prints, copies etc. to a default department called
UNDEFINED.
If the department code feature is enabled, theadministrator may
enable department code enforcement from TopAccess. If the
department code feature is disabled, the department code
enforcement option is grayed out.
When enabled, this option requires all users to enter a valid
department code to print to the controller.
Note: There is no enforcement of department codes in Unix
filters, Macintosh PPD files or raw print jobs.

Enabling Department Codes

You enable or disable the department code feature from the
copier's control panel. You cannot enable the feature until you
have created at least one department code. Theadministrator can
use TopAccess to see whether the department code feature is
enabled.

Enabling Department Code Enforcement

1 Log in to TopAccess as the administrator.
2 Click the
Administration
3 Click the
Device
4 From the Department Code Enforcement drop-down menu,
click .
Enable
5 Click .
Save

Creating the Master Department Code

You create department codes from the copier's control panel or
by using TopAccess. The first department code must be created
through the copier's control panel. It becomes the master
tab.
submenu.
GL-1020 Administrator's Guide