Toshiba GL-1020 Administrator's Manual page 268

268
4 If the IP/IPX Address displayed in the Discovery page is
correct, and the broken connection persists, 'ping' to that IP
address to see if the GL-1020 responds.
5 In the unlikely event that the GL-1020 does not return a
response to the 'ping' command, reboot the GL-1020 from
the front panel of the copier.
How to Reboot the GL-1020
It is sometimes necessary to reboot the controller before new
settings can take effect. At other times, you may need to reboot
the controller to synchronize communication with the copier
again. If possible, avoid rebooting the controller by physically
resetting it.
The preferred way to reboot is as follows:
1 Press
PRINTER/NETWORK
2 Press the tab.
PRINT
The main Print
menu
Sample Print menu screen on copier control panel
3 Press .
REBOOT
.
opens.
GL-1020 Administrator's Guide