Troubleshooting Hardware Errors - Toshiba GL-1020 Administrator's Manual

15

TROUBLESHOOTING HARDWARE ERRORS

GL-1020 Administrator's Guide
The topics in this chapter cover those errors or faults that affect
normal copier or controller operation. This includes, but is not
limited to, the following conditions:
Faulty or improperly installed system board, cables, and
connectors.
Faulty or malfunctioning copier components, such as standard
or optional finishing units, the Auto-Duplexing Unit (ADU), or
Large Capacity Feeder (LCF).
Corrupt or outdated controller software or copier firmware.
Interrupted or terminated communication between the copier
and the controller.
Note: Resolving copier operation problems falls outside the
scope of this guide, but this chapter will assist you to interpret
error messages and then identify the source of the problem. If
you determine it is related to copier operation, refer to your
TOSHIBA Toshiba Operator's Manual for Copying Functions.
This chapter also covers using the administration utility,
TopAccess, to diagnose and resolve hardware-related errors. For
more information about resolving error messages displayed on the
237