Image Overlay File Deleted; Duplex Errors; Printing On Wrong Side Of Letterhead - Toshiba GL-1020 Administrator's Manual

DUPLEX ERRORS

GL-1020 Administrator's Guide

Image Overlay File Deleted

Problem Description
A common misconception is that pressing
driver's Image Overlay properties sheet only removes the Image
Overlay file from the driver's Overlay list, when it actually
deletes the file altogether.
Corrective Action
Recreate the Image Overlay. We recommend that you save the
file as an independent document first. That way, if the overlay file
is later deleted or you want to create a new overlay file for a
different driver, you do not have to recreate the original document
each time.

Printing on Wrong Side of Letterhead

Problem Description
When duplex printing on preprinted paper, such as letterhead, the
document is printed on the wrong side of the paper.
Corrective Action
Printing on preprinted paper requires positioning the paper
correctly in the cassette. Correct paper position differs for duplex
(double-sided) versus simplex (single-sided) printing. It also
depends on whether you are pulling from the Large Capacity
Feeder or the upper, middle, or lower cassette.
Refer to the following diagrams for directions:
Loading orientation
for single-sided printing
Loading letterhead in the Large Capacity Feeder
For single-sided printing from the LCF, load the paper face up as
shown.
from the
Delete Overlay
Loading orientation
for double-sided printing
285