Overview - Valor LEGEND G4 785XN Installation And Owner's Manual

QUALIFIED
INSTALLER
This appliance may ONLY be installed in an existing unaltered,
functioning solid-fuel burning fi replace with a working fl ue and
constructed of non-combustible material.
DO NOT install into combustible construction. This appliance
is NOT APPROVED for installation with a zero clearance kit.
WARNING
! WARNING
Some materials or items, although
safe, may discolor, shrink, warp,
crack, peel, and so on because of
the heat produced by the fi replace.
Avoid placing candles, paintings,
photos, and other items sensitive to
heat around the fi replace.
WARNING
! WARNING
HOT HEARTH / FLOOR! The
hearth or floor in front of the
fireplace may become very hot
when the fi replace heats. Do not use
the hearth as a seat or shelf. Solid
wood fl ooring in front of the fi replace
(if allowed) may shrink during the
heating season due to heat.
Trim
(sold separately)
785 fi replace
18

Overview

Chimney Terminal Cap
Flashing
2 x 3" approved fl ex
chimney liners running
full length
Existing unaltered,
functioning solid-fuel
burning fi replace &
chimney
Existing non-combustible
hearth as required for
existing solid-fuel burning
fi replaces. Combustible
hearths or fl oors must
be mininum 4" (102 mm)
below bottom of heater.