Checking Pilot And Burner Flames - Valor LEGEND G4 785XN Installation And Owner's Manual

Direct vent gas insert

Hide thumbs

Table Of Contents

Table of Contents

To reﬁ t the window:

1. Place the window in its

bottom railing and push its top

against the ﬁ rebox. Ensure to

remove any particles in the

railing before installing the

window.

2. While you hold

it, hook the side

levers into the

window tabs.

3. Pull out the top of the window and release it to

ensure the springs return it.

4. Apply ﬁ rm hand pressure around the window frame

to ensure the window is sealed tight against the

ﬁ rebox.

5. If the Hot Glass Warning plate has been removed

from the front lower corner of the window,

reinstall it by sliding it between the glass and

the frame as indicated.

Hot Glass Plate

6. Reinstall the access side doors to the ﬁ replace.

7. Rehook the front trim ﬁ tted with the barrier screen.

WARNING

FOR SAFETY PURPOSE, ensure the barrier

screen is re-installed on the fireplace front

after maintenance.

Owner's Information

Window

frame

The window unit must be correctly installed,

fastened and sealed after servicing or serious

bodily injury and/or damage to the appliance

may result.

Bottom

To ensure a safe operation:

railing

• Double-check that the bottom of the window

frame is correctly installed in the bottom

support railing;

• Verify that the levers are hooked properly to

the window tabs then;

• Pull out the top of the window and release it

to insure the springs return it;

• Ensure the window is sealed before operation.

Failure to install the window correctly can

leak carbon monoxide, affect the performance

of the ﬁ replace, damage components, cause

overheating resulting in dangerous conditions.

Damage caused by incorrect window installa-

tion is not covered by the Valor warranty.