Test Functions; Overview; Short Status - CAB eos 4 Configuration Manual

26 5

Test Functions

5.1

Overview

The printer is equipped with different test functions providing information on:
• the most important configuration parameters
• the fonts available in the printer
• important hardware components and connected peripheral devices
• the print image quality and state of the thermal printhead
• the function of label detection in conjunction with the optical properties of the label medium
• the label data sent from the computer or read out from the storage device
5.2

Short Status

The Short status provides an overview of important status information in the display of the printer.
 Start Offline menu.
 Select Short status.
 Exit the Short status menu with Close.
The following parameters are displayed in the Short status menu:
Line Meaning
1 Printer type
2 Version number and creation date of the printer operating system
(firmware)
3 Serial number of the PCB CPU
4 Operative time and number of printed labels
5 Previously printed paper lengths with thermal direct printing / thermal
transfer printing
6 IPv4 address of the printer when connected to a network via Ethernet
7 IPv6 address of the printer when connected to a network via Ethernet
8 MAC address of the network adapter on the PCB CPU
9 IPv4 address of the printer when connected to a network via WLAN
10 IPv6 address of the printer when connected to a network via WLAN
11 MAC address of the WLAN adapter
12 Resolution, number of dots and revision of the printhead
13 Version number of the label sensor firmware
14 Revision of PCB CPU and the FPGA
15 Copyright
Table 11 Content of the Short status
Example
EOS1/300
Firmware V4.13
Jan 15 2013
S/N
170113310794
Hours/no. of labels
178h/2444
Thermal/Transfer
96,77m/4,03m
eth0 IPv4
192.168.9.48
eth0 IPv6
fe80::202:e7ff:fe03:59d8
eth0 MAC
00:02:e7:03:59:d8
wlan0 IPv4
10.20.2.200
wlan0 IPv6
fe80::210:60ff:fe31:7c4
wlan0 MAC
00:10:60:31:07:c4
TPH
300dpi, 1248dots
Rev. 1.0.3
Label Sensor
Rev 0.14
PCB Rev. 5
FPGA Rev. 5
26