Table of Contents
Advertisement
4
Configuration
Parameter
Cleaning
interval
Debug mode
Parameters of the menu Setup > Machine param.
Table 4
Meaning
Setting of intervals for printhead cleaning in increments of 100 m
media passage.
If the set length of the medium (label strip, transfer ribbon) has
passed the printhead and an error occurs in the flow of the medium
(e.g. label end, transfer ribbon end), the Clean printhead!
message appears in the display.
The error message for the error which occurred is not displayed until
the Clean printhead! message is acknowledged. As long as no
errors occur in the medium flow, no messages are displayed and the
print job is continued even if the cleaning interval has passed.
Operating mode which supports the firmware programmer when
localizing errors.
13
Default
1000 m
Off
Hide quick links:
Advertisement
Table of Contents
