Event Log - CAB eos 4 Configuration Manual

34 5 Test Functions
5.9

Event Log

Access only with service key inserted!
The label printer saves the following events in the Event log:
• Hardware fault
• Printhead replacement
• Firmware updates
• Resetting of the service counters
The printout occurs using the heat level and print speed specified in the Setup > Print param. menu.
Notice!
i
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert service key into a USB master interface.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start Offline menu.
 Select Test > Event log.
Mon Jan 21 08:13:57 2013
EOS1/300
Firmware V4.13 (Jan 15, 2013) - #170113310794
Date Description
23.11.11 11:14 Clear service counters
30.11.11 10:42 Firmware update -> V4.04 (0000)
28.03.12 08:08 Firmware update -> V4.07 (0000)
25.08.12 11:12 New printhead, 8 dots/mm, #04-007
06.09.12 14:39 New printhead, 12 dots/mm, #0X-01024
03.01.13 13:01 Clear service counters
15.01.13 08:40 Firmware update -> V4.13 (0000)
Fig. 19
Event log
Event log
34