Range Selector Lever - Mitsubishi FUSO FE 2006 Owner's Manual

Button
<Automatic transmission vehicles>
The range selector lever is used to select gear
ranges. Select lever positions carefully to ensure
proper engagement of each gear.
1 Using the range selector lever
NOTE:
•
Z11851
•
If the range selector lever cannot be moved out of
the "P" position even with the starter switch in the
"ON" position and the brake pedal depressed, move
the range selector lever while pushing the shift lock
release knob.
Shift lock
This problem can be caused by an electrical fault,
release knob
so have an inspection carried out by an authorized
dealer.
Z11852
2 Ranges
P: Used when stationary, for example, when start-
R: For backing up. The backup lamps illuminate,
N: The engine can be started with the lever in this
D: For normal driving. With the overdrive switch in

Range selector lever

: While depressing the brake pedal, push the
button and move the range selector lever.
The lever cannot be moved unless the
starter switch is in the "ON" position.
: Push the button and move the lever.
: Move the lever without pushing the button.
Never push the button for the range selector
lever movements indicated by the black arrows
( ) in the illustration. With the button pressed,
the lever could unexpectedly slip into the "P",
"R", "3" or "2" position.
For safety, the range selector lever cannot be
moved out of the "P" position unless the brake
pedal is depressed. Even with the brake pedal
depressed, the range selector lever cannot be
moved if the starter switch is in the "LOCK" posi-
tion or "ACC" position.
ing or warming up the engine. The starter key
can be removed with the range selector lever in
this position.
and a warning buzzer sounds.
position, but it is safer to use the "P" position.
the "ON" position, gearshifts are made automati-
cally using the 1st through 6th gears. With the
overdrive switch in the "OFF" position, gearshifts
are made automatically using the 1st through
4th gears.
5-15