Removing Jammed Staples - Toshiba 4560 Operator's Manual

9. REMOVING JAMMED STAPLES

When the MG-2010,MG-2012 or MG-2015
is used:
The STAPLE symbol
sorter when a staple has jammed in the
stapler and this message appears on the
Message Display panel:
Examine stapler
Remove the jammed staples as described
below.
∗ Refer to page 104 for the STAPLE symbol
position.
When the MG-2010 is used:
1 1 1 1 1
Turn off the power switch.
Open the stapling unit cover and loosen
the wing nut that holds the stapling unit
in place.
2 2 2 2 2
Holding the stapling unit as shown, lift it
slightly (arrow
toward you (arrow
∗
flashes on the
) and take it out slowly
).
Wing nut
157