Removing Jammed Staples (Optional) - Toshiba e-STUDIO3511 Operator's Manual
Basic function
Hide thumbs
Also See for e-STUDIO3511:
- Service handbook (552 pages) ,
- Manual (342 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
7. REMOVING JAMMED STAPLES (OPTIONAL)
If copies have not been stapled in the staple mode, "Examine stapler" appears.
This shows that the staples are jammed. Remove them as described below.
Saddle-Stitch Finisher (MJ-1024)/Multi-Staple Finisher (MJ-1023)
1
Open the front cover of the finisher.
- When MJ-1024 is installed
- When MJ-1023 is installed
Take out the staple cartridge.
2
12
274
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
Advertisement
Table of Contents
